Request a demo
Fill out the form and
we’ll be in contact shortly
Monitor real-time foot traffic and predict space capacity with Ubiqisense's footfall sensors.
Count footfall at a single entrance, across a building, or your entire portfolio, all with the same sensor. Wall or ceiling mounted, unlike most competitors, which are ceiling-only and limited by it in standard office heights.
Wall or ceiling mounted, unlike most competitors, which are ceiling-only and limited by it in standard office heights.
Footfall counted at every entrance and zone tells you when people actually arrive, not when a schedule assumes they will. Align staffing, cleaning, and security to real traffic patterns, live, not guesswork.
No footage, just the count. Considering a footfall camera? A sensor gives you the same data with more privacy, ISO 27001, SOC 2, and GDPR compliant by architecture.
Every data point updates in real time, down to the second, at 99% accuracy over time, tuned to your building's specific requirements.
Machine learning continuously improves that accuracy the longer the sensor runs, learning your space as it counts.
That data is granular and reliable enough to base a real space decision on, the kind you'd stake your career on.
GDPR-native by architecture, ISO 27001 and SOC 2 certified. Sensor output is fully anonymised at the point of measurement, no personal data is ever created, transmitted, or stored.
Ubiqisense's standard anonymous data hosting is AWS, with critical-infrastructure-ready hosting available on Google Cloud, private in-country cloud, or fully on-premises.
The Ubiqisense sensor and platform connect seamlessly to your BMS over BACnet, MQTT, and webhooks for real-time alerts.
Data pushes directly into the proptech and BI platforms you already run, including ProptechOS, Planon, and Power BI.
Pre-built integrations are ready for Poly and SignInApp, with more added on request.
The Ubiqisense platform captures both footfall and occupancy, and can answer different questions. Here's which mode answers which one, by level.
| Data source | Real-time | Visual data captured | Accuracy | Hardware to manage |
|---|---|---|---|---|
| Ubiqisense sensor | Real-time, updates every few seconds | No, ever | 99% accurate, bi-directional | One sensor, wall or ceiling mounted |
| Manual counting | No | No | 85-95%, inconsistent across shifts | None, labour-intensive |
| Infrared beam counters | Yes | No | 75-90%, undercounts groups, often no direction sensing | One unit per entrance |
| Thermal sensors | Yes | Low-resolution heat image, not identifying | ~85%, degrades above 28-30°C or in direct sunlight | Overhead unit, ~10 sqm coverage each |
| WiFi and Bluetooth tracking | Partial | No visual data, but MAC address data may constitute personal data under GDPR | 60-80%, only detects active devices | Existing infrastructure, inconsistent accuracy |
| Video analytics / stereo cameras | Yes | Captures visual data. Can be GDPR-compliant if processed on-device with no footage stored or transmitted, higher risk when built on existing CCTV | 95-99%, highest of any method | Camera network, ongoing maintenance, most expensive |
The practical difference: most vendors ask you to choose between two or three different sensor products depending on the space, then manage each as a separate hardware line.
Ubiqisense uses one sensor across your entire estate, reconfigured per space rather than replaced.
